Satellite Systems Corporation
Satellite Systems Corporation Resource Center - Warranty Info - Get a Product Quote
Manufacturers Satcom Beacon Receivers, Frequency Converters and Tracking ControlsAbout Satellite Systems CorporationContact Satellite Systems CorporationBeacon Receivers, Frequency Converters and Tracking ControlsAntenna positioning systems, FM analog SCPC Modulators, FM analog SCPC Receivers, Redundant switching systemsSatellite Systems Corporation
Satellite Systems Corporation
Satellite Systems Corporation   P R O D U C T S
Beacon Receivers | Converters | Controls | FM SCPC | RF & Redundancy Switches | BDC's/LNB's | Test Equipment

Model 4841
L / C / Ku-band Downconverter
Conversion Station

 Frequency Converters


The Satellite Systems Model 4841 is an affordable switchable Block Downconverter for both C-band and full global Ku-bands, as well as a pass-thru path for L-band. The unit contains integral RF routing. Simply enter the desired Frequency via the front panel keypad or Remote Control, and the appropriate BDC is selected and routed to the L-band output jack on the rear panel.

An option is available to automatically control a Satellite Systems slave-mode Beacon Tracking Receiver. In this mode, the BTR serial control cable is connected to the Conversion Station, thus allowing the customer to simply enter the desired L-, C-, or Ku-band frequency, and the Beacon Tracking Receiver will automatically tune the correct L-band frequency. The only front panel control needed on the Slave BTR is the Reference level adjustment, which can also be adjusted remotely.

All controls are made via front panel keypad and display or Remote Control via the user selected RS-232, RS-485/422, or Ethernet. When used with the SSC BTR with Slave mode, all M&C communications for both the Conversion Station and the BTR are routed thru the Conversion Station. Thus only one M&C connection is required.

Unit Specifications
INPUT FREQUENCY BANDS 930 to 2300 MHz, 3.4 to 4.2 GHz,
10.7 to 11.7 GHz and 11.7 to 12.75 GHz
OUTPUT FREQUENCY 930 to 2300 MHz
FREQUENCY CONVERSION Internal
INTERNAL LOCAL OSCILLATORS 5.15, 9.75, and 10.75 GHz
LO STABILITY ±10 kHz over +10 to +50 deg C
±25 kHz over -40 to +55 deg C
LO PHASE NOISE -75dBc/Hz@1 kHz max
INPUT IMPEDANCE 50 Ohm / DC Blocked
OUTPUT IMPEDANCE 50 Ohm / DC Blocked
RF CONNECTORS Type N Female, 1, 2, 3, or 4 inputs, 1 output
PRIME POWER 90 - 260 VAC @ 47 - 63 Hz
OPERATING TEMPERATURE -10 to +50 deg. C
HUMIDITY up to 95%, non-condensing
MOUNTING Standard 19" Rack Mount
SIZE 1 RU, 18.75" deep
WEIGHT 15 pounds
REMOTE CONTROL RS-232, RS-485/422, Ethernet front panel selectable

Options

Other combinations of IF-, L-, C-, I-, X-, Ku- and Ka-bands are available. Please contact factory for details.
Various Input connector options are available. Please contact factory for details.
Various LNA Power options are available. Please contact factory for details.

 PDF Version - Requires Adobe ReaderTM